Auto Parts Engine Cylinder Liner for Toyota 1HZ

Measures to reduce cylinder liner wear 1. Start and start correctly When the engine starts cold, due to low temperature, large oil viscosity and poor fluidity, the oil pump is insufficient. At the same time, the oil on the original cylinder wall flows down the cylinder wall after stopping, so the lubrication is not as good as that in normal operation at the moment of starting, resulting in a great increase in the wear of the cylinder wall when starting. Therefore, when starting for the first time, the engine should be idled for a few laps, and the friction surface should be lubricated before starting. After starting, idle operation should be heated up, it is strictly prohibited to blast the oil port, and then start when the oil temperature reaches 40℃; Start should adhere to the low-speed gear, and step by step each gear to drive a distance, until the oil temperature is normal, can turn to normal driving. 2. Correct selection of lubri…