Double Holes Pure Copper Cable Lug

The copper terminal must withstand the high temperature in the preheating zone and the temperature transmitted to the terminal body by wave soldering during the whole assembly process.  Flux must not affect terminals and must be easily removed without any residue.  The entire assembly process must be water-washable.  Preheating temperatures are often 100°C or higher, and peak temperatures of 280°C are not uncommon.  Perforated soldering pins must be accurately positioned, of suitable size, evenly placed, and of good solderability to facilitate insertion and welding.  In the whole assembly process must withstand the heat treatment of high temperature impact, in welding mainly used infrared preheating and convection preheating heat conduction to the solder needle and tin plate interface to melt solder paste.  Contact anti-fusion welding performance is poor, in the start of the motor or circuit short circuit, large current to conta…

A Picture Interactive Platform For Global Opportunities

Copyrights © 2024 penglais.com All Rights.Reserved .